The Model YLH tilter is used for refined filtration of returned oil from the hydraulic system. Chemical fiber or glass fiber is used as the filtration core. The filter is equipped with a signal sender and by-pass valve. When the filter is clogged and the vacuum up to the stipulated value in the specifications, alarm- will be given

Main features include:

1. filter is mounted directly on the tank cover, Simplified stretch of eight oil tank. Oil inlet with a screw thread and a square flange type connected with the return line, the line is simple to install ten thousand then.

2. When the filter clogging, simply open the cover, you can remove the filter, replace the filter installed after the cover, you can cast eight runs, it is very convenient.

3. in the inlet filter with a filter clogging sender, the sender has an intuitive and two functions. By observing the sender instruction sheet, you can keep abreast of filter blockage. When the filter plug, the inlet pressure to meet the technical parameters specified in the table value, the sender will send a signal, and you should immediately shut down to replace the filter.

4. is provided with a bypass passage means when the filter clogging, can not deal with failure alarm immediately after the sender, the inlet pressure to rise to technical parameters specified in the table value, the bypass valve will turn itself on, open another passage, to protect the filter from damage, ensure that the system as usual.

5. filter at work, Cang filtered through filter pollutants concentrated in the filter provided in the sewage collection cup inside. When replacing the filter with the same filter out, to avoid falling into the fuel tank has been re-filtered contaminants.

6. using the new fiber filter cartridge with high filtration precision, through the oil capacity, low pressure loss, pollutant carrying capacity and so on.